Pitch
2.54 mm
Female header connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
Female header connector · 2.54 mm · Contact count: 8
Series specification range: Pitch: 2.54 mm · Positions / contacts: 8
Quotation and selection support
- Pitch
- 2.54 mm
- Positions / contacts
- 8
- Mated height
- Ultra-low profile (custom acceptable)
- Termination style
- Solder
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Female header connector. Female header connector. Series configuration parameters: Pitch: 2.54 mm; Positions / contacts: 8; Mated height: Ultra-low profile (custom acceptable).
Discuss this product requirementProduct features
Positions / contacts
8
Mated height
Ultra-low profile (custom acceptable)
Termination style
Solder
Material
Plastic
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Termination style | Solder |
|---|---|
| Durability | High |
| Pitch | 2.54 mm |
| Locking method | ZIF / Non-ZIF Optional |
| Mated height | Ultra-low profile (custom acceptable) |
| Mating Cycles | ≥500 cycles |
| Positions / contacts | 8 |
Electrical & signal
| Rated current | 3.0 A per contact |
|---|---|
| Rated voltage | 120 V AC/DC |
| Maximum Contact Resistance | ≤20 mΩ |
| Minimum Insulation Resistance | ≥1000 MΩ |
| Withstanding Voltage | 600 V AC 1min |
| Vibration resistance | Pass 10-2000Hz vibration test, no open circuit |
Materials & finish
| Material | Plastic |
|---|---|
| Contact pin material | Phosphor Bronze |
| Contact material | High-elastic Beryllium Copper / Brass |
| Contact plating | Nickel underlayer + Gold flash / Selective hard gold plating (custom thickness) |
| Insulator Housing | High-temp engineering plastic, UL94 V-0 flame retardant |
| Seal Material | High-performance silicone rubber for IP68 sealing |
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|---|
| Operating temperature | -40℃ ~ +105℃ |
Other specifications
| Connection type | Snap-On |
|---|---|
| Pin Configuration | 2*8 Pin (16 Positions) |
| Orientation | Vertical PCB mount |
| Soldering Process | Through‑hole reflow / wave‑solder compatible; strictly avoid over‑temperature & long‑time heating |
Drawings & technical files
Female header connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 2.54 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
How many positions or contacts are specified?
Positions / contacts: 8. Where a range or multiple options are shown, select the required count and pin assignment.
What is specified for Mated height?
Mated height: Ultra-low profile (custom acceptable).
What termination arrangement is used?
Termination style: Solder. Check installation clearance and mating geometry for this configuration.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.