Technical parameter · Transmission speed
10/100Mbps, full duplex
Remote I/O module
Product category illustration
I/O & data connectors
Remote I/O module DF50-C-MD-TCP
Technical parameter · Transmission speed: 10/100Mbps, full duplex · Technical parameter · Internal system electrical terminal rated voltage input: 24V DC (20.4V DC~28.8V DC)
Quotation and selection support
- Model
- DF50-C-MD-TCP
- Technical parameter · Transmission speed
- 10/100Mbps, full duplex
- Technical parameter · Internal system electrical terminal rated voltage input
- 24V DC (20.4V DC~28.8V DC)
- Technical parameter · Internal system electrical terminal rated current input
- 0.75A (typical value at 24V)
- Technical parameter · Alarm function
- Diagnostic alarm, process alarm, connector plugging alarm
Product overview
DF50-C-MD-TCP. Remote I/O module. Transmission speed: 10/100Mbps, full duplex; Internal system electrical terminal rated voltage input: 24V DC (20.4V DC~28.8V DC); Internal system electrical terminal rated current input: 0.75A (typical value at 24V).
Use the complete DF50-C-MD-TCP ordering code and review the interface, installation and rating conditions below.
Discuss this product requirementProduct features
Technical parameter · Internal system electrical terminal rated voltage input
24V DC (20.4V DC~28.8V DC)
Technical parameter · Internal system electrical terminal rated current input
0.75A (typical value at 24V)
Technical parameter · Alarm function
Diagnostic alarm, process alarm, connector plugging alarm
Environmental requirements · Permissible ambient temperature (during operation)
-25-60 ℃
Product images
The image for this configuration is to be confirmed. Request the image matching your connection requirement.
Request the applicable product imageTechnical specifications
Product identification
| Manufacturer order number | 30050002748 |
|---|
Mechanical & connection
| Wiring parameters · Strip length | 8-10mm |
|---|
Electrical & signal
| Technical parameter · Transmission speed | 10/100Mbps, full duplex |
|---|---|
| Technical parameter · Minimum cycle time | 1ms |
| Technical parameter · Internal system electrical terminal rated voltage input | 24V DC (20.4V DC~28.8V DC) |
| Technical parameter · Internal system electrical terminal rated current input | 0.75A (typical value at 24V) |
| Technical parameter · Internal system electrical rated voltage output | 5VDC |
| Technical parameter · Internal system electrical rated current output | 2A |
| Technical parameter · Working voltage | 24V DC+20%/-15% |
| Technical parameter · Transmission distance | 100 m |
| Technical parameter · Transmission medium | Category 5 twisted pair cables |
| Environmental requirements · Impact resistance | 15g, in accordance with IEC 60068-2-27 standard |
| Environmental requirements · Corrosion resistance | Complies with IEC 60068-2-42 and IEC 60068-2-43 standards |
Environmental conditions
| Environmental requirements · Permissible ambient temperature (during operation) | -25-60 ℃ |
|---|---|
| Environmental requirements · Permissible ambient temperature (storage) | -40-85 ℃ |
Other specifications
| Technical parameter · Alarm function | Diagnostic alarm, process alarm, connector plugging alarm |
|---|---|
| Technical parameter · Number of expandable modules | Thirty-two |
| Technical parameter · PDO data | 1024 bytes |
| Technical parameter · Isolation method | Electrical isolation from the site |
| Technical parameter · Bus address setting | PROFINET specification |
| Environmental requirements · Protection type | IP20 |
| Environmental requirements · Pollution level | 2. Comply with IEC 61131-2 standard |
| Environmental requirements · Working altitude | Temperature without derating: 0-2000m |
| Environmental requirements · Relative humidity (non condensing) | 5-95% RH |
| Environmental requirements · Anti vibration | 4g, in accordance with IEC 60068-2-6 standard |
| Environmental requirements · EMC - Immunity | Complies with EN 61000-6-2 standard |
| Environmental requirements · EMC - Radiated interference | Complies with EN 61000-6-3 standard |
| Environmental requirements · Permissible H2S pollutant concentration at 75% relative humidity | 10ppm |
| Environmental requirements · Permissible SO2 pollutant concentration at 75% relative humidity | 25ppm |
| Wiring parameters · Connection technology: input/output | push-in type terminal blocks |
| Wiring parameters · Crimping area of wire | 0.2~1.5mm²/26~16AWG |
Drawings & technical files
DF50-C-MD-TCP drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is specified for Technical parameter · Transmission speed?
Technical parameter · Transmission speed: 10/100Mbps, full duplex.
What voltage values and standards apply?
Technical parameter · Internal system electrical terminal rated voltage input: 24V DC (20.4V DC~28.8V DC); Technical parameter · Internal system electrical rated voltage output: 5VDC; Technical parameter · Working voltage: 24V DC+20%/-15%. Keep each value with its stated standard, class and test condition.
What current values and conditions apply?
Technical parameter · Internal system electrical terminal rated current input: 0.75A (typical value at 24V); Technical parameter · Internal system electrical rated current output: 2A. Keep each value with its stated standard, class and test condition.
What is specified for Technical parameter · Alarm function?
Technical parameter · Alarm function: Diagnostic alarm, process alarm, connector plugging alarm.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.