Pitch
1.25 mm
Wire-to-board connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Wire connectors
Wire-to-board connector · 1.25 mm · Right angle
Series specification range: Pitch: 1.25 mm · Pins: 4p, 5P, 1P, 7P, 10P, 9P, 3P, 8P, 2P, 6P
Quotation and selection support
- Pitch
- 1.25 mm
- Pins
- 4p, 5P, 1P, 7P, 10P, 9P, 3P, 8P, 2P, 6P
- Mounting orientation
- Right angle
- Rated current
- 1.0A
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Wire-to-board connector. Wire-to-board connector. Series configuration parameters: Pitch: 1.25 mm; Pins: 4p, 5P, 1P, 7P, 10P, 9P, 3P, 8P, 2P, 6P; Mounting orientation: Right angle.
Discuss this product requirementProduct features
Pins
4p, 5P, 1P, 7P, 10P, 9P, 3P, 8P, 2P, 6P
Mounting orientation
Right angle
Rated current
1.0A
Withstand voltage
500V AC/minute
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Pins | 4p, 5P, 1P, 7P, 10P, 9P, 3P, 8P, 2P, 6P |
|---|---|
| Pitch | 1.25 mm |
| Mounting orientation | Right angle |
Electrical & signal
| Rated current | 1.0A |
|---|---|
| Withstand voltage | 500V AC/minute |
| Rated voltage | 50V AC DC |
| Contact resistance | 20m Ω |
| Withstand voltage | 500V AC/min |
| Insulation resistance | 100mΩ |
Environmental conditions
| Temperature range | -25-85℃ |
|---|
Other specifications
| Type | Wire To Board |
|---|
Drawings & technical files
Wire-to-board connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 1.25 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
How many positions or contacts are specified?
Pins: 4p, 5P, 1P, 7P, 10P, 9P, 3P, 8P, 2P, 6P. Where a range or multiple options are shown, select the required count and pin assignment.
What mounting arrangement is used?
Mounting orientation: Right angle. Check installation clearance and mating geometry for this configuration.
What current values and conditions apply?
Rated current: 1.0A. Keep each value with its stated standard, class and test condition.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.