Pitch
1.25mm
Wire-to-board connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Wire connectors
Wire-to-board connector · 1.25mm · Contact count: 8
Series specification range: Pitch: 1.25mm · Positions / contacts: 8
Quotation and selection support
- Pitch
- 1.25mm
- Positions / contacts
- 8
- Mounting type
- Through Hole
- Rated current
- 1.0A
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Wire-to-board connector. Wire-to-board connector. Series configuration parameters: Pitch: 1.25mm; Positions / contacts: 8; Mounting type: Through Hole.
Discuss this product requirementProduct features
Positions / contacts
8
Mounting type
Through Hole
Rated current
1.0A
Rated voltage
250V
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Pitch | 1.25mm |
|---|---|
| Pitch | 2.00mm(0.079'') |
| Mounting type | Through Hole |
| Positions / contacts | 8 |
Electrical & signal
| Rated voltage | 250V |
|---|---|
| Rated current | 1.0A |
| Withstand voltage | 500V AC/minute |
| Current rating | 2.0 AMP |
| Contact resistance | 20 mΩ Max |
| Withstand voltage | 500 V AC/DC |
| Insulation resistance | 1000MΩ Min |
Materials & finish
| Plating | tin plating |
|---|---|
| Contact material | coppy Alloy |
| Contact plating | Au over Ni |
| Insulator material | PA6T+30%GF(UL94V-0) |
Environmental conditions
| Operation temperature | -40℃ to 105℃ |
|---|
Drawings & technical files
Wire-to-board connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 1.25mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
How many positions or contacts are specified?
Positions / contacts: 8. Where a range or multiple options are shown, select the required count and pin assignment.
What mounting arrangement is used?
Mounting type: Through Hole. Check installation clearance and mating geometry for this configuration.
What current values and conditions apply?
Rated current: 1.0A; Current rating: 2.0 AMP. Keep each value with its stated standard, class and test condition.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.