Pitch
3.00 mm (0.118 inch)
Wire-to-board connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Wire connectors
Wire-to-board connector · 3.00 mm (0.118 inch) · Vertical through hole for PCB
Series specification range: Pitch: 3.00 mm (0.118 inch) · Mounting style: Vertical through hole for PCB
Quotation and selection support
- Pitch
- 3.00 mm (0.118 inch)
- Mounting style
- Vertical through hole for PCB
- Termination style
- Solder
- Rated current
- 5 A per contact (AWG 20-24 wire)
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Wire-to-board connector. Wire-to-board connector. Series configuration parameters: Pitch: 3.00 mm (0.118 inch); Mounting style: Vertical through hole for PCB; Termination style: Solder.
Discuss this product requirementProduct features
Mounting style
Vertical through hole for PCB
Termination style
Solder
Rated current
5 A per contact (AWG 20-24 wire)
Connection type
Snap-On
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Durability | High |
|---|---|
| Termination style | Solder |
| Pitch | 3.00 mm (0.118 inch) |
| Mating Cycles | Min 30 cycles |
| Mounting style | Vertical through hole for PCB |
| Locking Mechanism | Positive housing lock |
Electrical & signal
| Rated current | 5 A per contact (AWG 20-24 wire) |
|---|---|
| Rated voltage | 250 V AC / DC |
| Maximum Withstand Voltage | 1500 V AC / 1 min, no breakdown |
| Contact resistance | ≤ 20 mΩ max |
| Insulation resistance | ≥ 1000 MΩ @500V DC |
Wire & cable
| Applicable Wire | AWG 28 ~ AWG 20 stranded copper wire |
|---|
Materials & finish
| Plating | tin plating |
|---|---|
| Housing material | Nylon 66 / LCP, UL94-V0 flame retardant |
| Terminal material | Phosphor Bronze |
| Standard Plating | Tin over nickel; gold plating optional on contact area |
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|---|
| Operating temperature | -40 °C ~ +105 °C |
Other specifications
| Connection type | Snap-On |
|---|---|
| Contact | Brass With gold plating Over 50U |
| Connector Type | Wire-to-Board, Vertical through hole Header |
| Pin Count Range | 4P,6P,8P,10P,12P,14P,16P,18P,20P,22P,24P |
| Soldering Process | Lead-free through hole soldering; Peak temp ≤260 °C, 30s max exposure, max 3 cycles |
Drawings & technical files
Wire-to-board connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 3.00 mm (0.118 inch). The PCB footprint or mating interface must use the pitch of the selected configuration.
What mounting arrangement is used?
Mounting style: Vertical through hole for PCB. Check installation clearance and mating geometry for this configuration.
What termination arrangement is used?
Termination style: Solder. Check installation clearance and mating geometry for this configuration.
What current values and conditions apply?
Rated current: 5 A per contact (AWG 20-24 wire). Keep each value with its stated standard, class and test condition.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.