Pitch
2.54 mm (0.1 inch)
Female header connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
Female header connector · 2.54 mm (0.1 inch) · DIP through hole (Straight)
Series specification range: Pitch: 2.54 mm (0.1 inch) · Mounting style: DIP through hole (Straight)
Quotation and selection support
- Pitch
- 2.54 mm (0.1 inch)
- Mounting style
- DIP through hole (Straight)
- Termination style
- Solder
- Material
- Plastic
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Female header connector. Female header connector. Series configuration parameters: Pitch: 2.54 mm (0.1 inch); Mounting style: DIP through hole (Straight); Termination style: Solder.
Discuss this product requirementProduct features
Mounting style
DIP through hole (Straight)
Termination style
Solder
Material
Plastic
Temperature range
-40 To 85 °C
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Termination style | Solder |
|---|---|
| Durability | High |
| Pitch | 2.54 mm (0.1 inch) |
| Mounting style | DIP through hole (Straight) |
| Mating Cycles | 500 cycles min (tin plating); 1000 cycles min (gold plating) |
Electrical & signal
| Rated current | 3.0 A per contact max |
|---|---|
| Rated voltage | 250 V AC/DC |
| Contact resistance | ≤20 mΩ (initial) |
| Insulation resistance | ≥1000 MΩ |
| Withstanding Voltage | AC 600 V, 1 minute |
Materials & finish
| Material | Plastic |
|---|---|
| Contact pin material | Phosphor Bronze |
| Housing color | Black |
| Insulator material | PBT, UL94V-0 flame retardant |
| Contact material | Brass (Phosphor-Bronze optional) |
| Contact plating | Matte tin / bright tin/gold flash over nickel / selective gold (custom gold thickness acceptable) |
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|---|
| Operating temperature | -40 ℃ ~ +105 ℃ |
Other specifications
| Connection type | Snap-On |
|---|---|
| Product type | Box Header / Shrouded Header |
| Pin Configuration | Dual-Row 2×5Pin, total 10 Positions |
| Contact Shape | 0.64 mm square pin |
| Soldering Type | Hand soldering/wave soldering (DIP through‑hole only; NOT for SMT reflow) |
| Wave Soldering Temp & Time | 255 ℃ ±5 ℃, dwell time 3-5 seconds maximum |
| Hand soldering | Iron tip temp ≤350 ℃, soldering time ≤3 seconds per pin |
Drawings & technical files
Female header connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 2.54 mm (0.1 inch). The PCB footprint or mating interface must use the pitch of the selected configuration.
What mounting arrangement is used?
Mounting style: DIP through hole (Straight). Check installation clearance and mating geometry for this configuration.
What termination arrangement is used?
Termination style: Solder. Check installation clearance and mating geometry for this configuration.
What is specified for Material?
Material: Plastic.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.