Pitch
3.96mm
Female header connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
Female header connector · 3.96mm · Through Hole
Series specification range: Pitch: 3.96mm · Mounting type: Through Hole
Quotation and selection support
- Pitch
- 3.96mm
- Mounting type
- Through Hole
- Termination
- Solder
- Contact material
- coppy Alloy
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Female header connector. Female header connector. Series configuration parameters: Pitch: 3.96mm; Mounting type: Through Hole; Termination: Solder.
Discuss this product requirementProduct features
Mounting type
Through Hole
Termination
Solder
Contact material
coppy Alloy
Maximum Contact Resistance
20M Ohm
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Pitch | 3.96mm |
|---|---|
| Mounting type | Through Hole |
| Termination | Solder |
| Plastic Height | 8.8mm |
Electrical & signal
| Maximum Contact Resistance | 20M Ohm |
|---|---|
| Current rating | 7Amp |
| Minimum Insulation Resistance | 1000M Ohm |
| Current rating | 7.0 AMP |
| Contact resistance | 20 mΩ Max |
| Withstand voltage | AC 1000V |
| Insulation resistance | 1000 MΩ Min |
Materials & finish
| Contact material | coppy Alloy |
|---|---|
| Contact plating | Au or Sn Over Ni |
| Insulator material | PA6T+30 GF(UL94-V0) |
| Contact Surface Finish | Gold Flash |
| Color | Black |
Environmental conditions
| Processing Temperature | 260±5℃ For 10 Seconds |
|---|---|
| Operating temperature | -40~105℃ |
| Operation temperature | -40℃ to 105℃ |
Other specifications
| Number of row | Dual |
|---|---|
| Available Pin Count | 4 Pins to 40 Pins |
Drawings & technical files
Female header connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 3.96mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
What mounting arrangement is used?
Mounting type: Through Hole. Check installation clearance and mating geometry for this configuration.
What termination arrangement is used?
Termination: Solder. Check installation clearance and mating geometry for this configuration.
What is specified for Contact material?
Contact material: coppy Alloy.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.