Pitch
2.54 mm (0.100 inch)
Female header connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
Female header connector · 2.54 mm (0.100 inch) · right angle 90° through hole (DIP)
Series specification range: Pitch: 2.54 mm (0.100 inch) · Mounting style: right angle 90° through hole (DIP)
Quotation and selection support
- Pitch
- 2.54 mm (0.100 inch)
- Mounting style
- right angle 90° through hole (DIP)
- Termination style
- Solder
- Material
- Plastic
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Female header connector. Female header connector. Series configuration parameters: Pitch: 2.54 mm (0.100 inch); Mounting style: right angle 90° through hole (DIP); Termination style: Solder.
Discuss this product requirementProduct features
Mounting style
right angle 90° through hole (DIP)
Termination style
Solder
Material
Plastic
Temperature range
-40 To 85 °C
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Termination style | Solder |
|---|---|
| Durability | High |
| Pitch | 2.54 mm (0.100 inch) |
| Mounting style | right angle 90° through hole (DIP) |
| Pin Size | 0.64 mm Square Standard Pin |
Electrical & signal
| Current rating | 5A |
|---|---|
| Rated current | 3 A Max per contact |
| Rated voltage | 250 V AC/DC RMS |
| Withstanding Voltage | 600 V AC, 1 min |
| Contact resistance | ≤ 20 mΩ |
| Insulation resistance | ≥ 1000 MΩ |
Materials & finish
| Material | Plastic |
|---|---|
| Contact pin material | Phosphor Bronze |
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|---|
| Operating Temperature Range | -40 ℃ ~ +105 ℃ |
Other specifications
| Connection type | Snap-On |
|---|---|
| Pin Configuration | Double Row, 2×4-pin (Total 8 Contacts) |
| Mating Type | Male Header + Female Receptacle Matching Set |
| Soldering Condition | 260 ℃, 10 s max |
Drawings & technical files
Female header connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 2.54 mm (0.100 inch). The PCB footprint or mating interface must use the pitch of the selected configuration.
What mounting arrangement is used?
Mounting style: right angle 90° through hole (DIP). Check installation clearance and mating geometry for this configuration.
What termination arrangement is used?
Termination style: Solder. Check installation clearance and mating geometry for this configuration.
What is specified for Material?
Material: Plastic.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.