Pitch
2.54 mm (0.100 inch), DIN standard
Female header connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
Female header connector · 2.54 mm (0.100 inch), DIN standard · through hole PCB
Series specification range: Pitch: 2.54 mm (0.100 inch), DIN standard · Stacking Height: 2.0 mm
Quotation and selection support
- Pitch
- 2.54 mm (0.100 inch), DIN standard
- Stacking Height
- 2.0 mm
- Mounting method
- through hole PCB
- Termination style
- Solder
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Female header connector. Female header connector. Series configuration parameters: Pitch: 2.54 mm (0.100 inch), DIN standard; Stacking Height: 2.0 mm; Mounting method: through hole PCB.
Discuss this product requirementProduct features
Stacking Height
2.0 mm
Mounting method
through hole PCB
Termination style
Solder
Material
Plastic
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Termination style | Solder |
|---|---|
| Durability | High |
| Pitch | 2.54 mm (0.100 inch), DIN standard |
| Total Height | H12.5 mm |
| Stacking Height | 2.0 mm |
| Mounting method | through hole PCB |
| Mating Cycles | Minimum 300 cycles |
Electrical & signal
| Rated current | 3A per contact |
|---|---|
| Rated voltage | 600V AC |
| Maximum Contact Resistance | ≤20 mΩ |
| Minimum Insulation Resistance | ≥1000 MΩ |
| Withstand voltage | 1000V AC, 1 minute |
Materials & finish
| Material | Plastic |
|---|---|
| Contact pin material | Phosphor Bronze |
| Contact material | Brass |
| Insulator material | Nylon, UL94V-0 |
| Plating Option | Tin / Gold flash / Selective gold plating |
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|---|
| Operating temperature | -40 ℃ ~ +105 ℃ |
| Storage temperature | -45 ℃ ~ +110 ℃ |
| Soldering Temperature & Time | 260 ℃, max 5 seconds |
Other specifications
| Connection type | Snap-On |
|---|---|
| Soldering Type | Wave soldering / Manual soldering |
Drawings & technical files
Female header connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 2.54 mm (0.100 inch), DIN standard. The PCB footprint or mating interface must use the pitch of the selected configuration.
What is specified for Stacking Height?
Stacking Height: 2.0 mm.
What mounting arrangement is used?
Mounting method: through hole PCB. Check installation clearance and mating geometry for this configuration.
What termination arrangement is used?
Termination style: Solder. Check installation clearance and mating geometry for this configuration.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.