Pitch
3.00 mm
Wire-to-board connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Wire connectors
Wire-to-board connector · 3.00 mm · through hole / SMD tape-and-reel
Series specification range: Pitch: 3.00 mm · Mounting type: through hole / SMD tape-and-reel
Quotation and selection support
- Pitch
- 3.00 mm
- Mounting type
- through hole / SMD tape-and-reel
- Applicable Wire Gauge
- 20-30 AWG
- Termination style
- Solder
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Wire-to-board connector. Wire-to-board connector. Series configuration parameters: Pitch: 3.00 mm; Mounting type: through hole / SMD tape-and-reel; Applicable Wire Gauge: 20-30 AWG.
Discuss this product requirementProduct features
Mounting type
through hole / SMD tape-and-reel
Applicable Wire Gauge
20-30 AWG
Termination style
Solder
Rated current
Max 8.5 A per pin (depends on wire gauge & temperature derating)
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Durability | High |
|---|---|
| Termination style | Solder |
| Pitch | 3.00 mm |
| Mating Cycles | ≥30 cycles |
| Mounting type | through hole / SMD tape-and-reel |
| Locking | Polarized anti-misplug shroud, PCB retention peg |
Electrical & signal
| Rated current | Max 8.5 A per pin (depends on wire gauge & temperature derating) |
|---|---|
| Rated voltage | 600 V AC/DC |
| Contact resistance | ≤ 15 mΩ |
| Insulation resistance | ≥ 1000 MΩ |
| Withstand voltage | 1500 V AC, 1 min |
| Vibration resistance | Meet general automotive harness vibration requirements |
Wire & cable
| Applicable Wire Gauge | 20-30 AWG |
|---|
Materials & finish
| Plating | tin plating |
|---|---|
| Housing color | Black |
| Housing material | High-temp thermoplastic, UL94V-0 |
| Contact material | Brass |
| Contact plating | Matte-tin / selective gold plating optional |
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|---|
| Operating temperature | -40 ℃ ~ +125 ℃ |
| Storage temperature | -45 ℃ ~ +130 ℃ |
Other specifications
| Connection type | Snap-On |
|---|---|
| Contact | Brass With gold plating Over 50U |
| Pin Count Range | 2 - 12 P, single row |
| Orientation | Horizontal / right angle |
| Through-hole soldering | Wave-solder max 260 ℃, 5 s dwell time |
Drawings & technical files
Wire-to-board connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 3.00 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
What mounting arrangement is used?
Mounting type: through hole / SMD tape-and-reel. Check installation clearance and mating geometry for this configuration.
What is specified for Applicable Wire Gauge?
Applicable Wire Gauge: 20-30 AWG.
What termination arrangement is used?
Termination style: Solder. Check installation clearance and mating geometry for this configuration.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.