Pitch
2.0 mm
Wire-to-board connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Wire connectors
Wire-to-board connector · 2.0 mm · Mating Cycles ≥500 cycles
Series specification range: Pitch: 2.0 mm · Mounting style: DIP through hole, right angle / Horizontal
Quotation and selection support
- Pitch
- 2.0 mm
- Mounting style
- DIP through hole, right angle / Horizontal
- Applicable Wire Gauge
- AWG #24-#28 stranded wire
- Termination style
- Solder
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Wire-to-board connector. Wire-to-board connector. Series configuration parameters: Pitch: 2.0 mm; Mounting style: DIP through hole, right angle / Horizontal; Applicable Wire Gauge: AWG #24-#28 stranded wire.
Discuss this product requirementProduct features
Mounting style
DIP through hole, right angle / Horizontal
Applicable Wire Gauge
AWG #24-#28 stranded wire
Termination style
Solder
Rated current
3 A AC/DC (per circuit)
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Durability | High |
|---|---|
| Termination style | Solder |
| Pitch | 2.0 mm |
| Mounting style | DIP through hole, right angle / Horizontal |
| Mating Cycles | ≥500 cycles |
Electrical & signal
| Rated current | 3 A AC/DC (per circuit) |
|---|---|
| Rated voltage | 250 V AC/DC |
| Contact resistance | ≤20 mΩ (initial) |
| Insulation resistance | ≥1000 MΩ |
| Withstanding Voltage | 1000 V AC / 1 min |
Wire & cable
| Applicable Wire Gauge | AWG #24-#28 stranded wire |
|---|
Materials & finish
| Plating | tin plating |
|---|---|
| Housing material | Nylon PA66, UL94-V-0 Flame Retardant |
| Terminal material | Brass / Phosphor-Bronze |
| Standard Plating | tin plated; Gold flash plating optional |
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|---|
| Operating Temperature Range | -25 ℃ ~ +85 ℃ |
Other specifications
| Connection type | Snap-On |
|---|---|
| Contact | Brass With gold plating Over 50U |
| Product type | Wire-to-Board Female Housing, 90° Horizontal Bent-Pin, Latch Buckle |
| Available Pin Count | 2- 16 Positions (Standard), custom positions negotiable |
Drawings & technical files
Wire-to-board connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 2.0 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
What mounting arrangement is used?
Mounting style: DIP through hole, right angle / Horizontal. Check installation clearance and mating geometry for this configuration.
What is specified for Applicable Wire Gauge?
Applicable Wire Gauge: AWG #24-#28 stranded wire.
What termination arrangement is used?
Termination style: Solder. Check installation clearance and mating geometry for this configuration.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.