Available Pitch
1.25 mm / PH2.0 mm / XH2.54 mm / 2510-2.54 mm
Wire-to-board connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Wire connectors
Wire-to-board connector · Contact count: 2-20 positions, single row
Series specification range: Available Pitch: 1.25 mm / PH2.0 mm / XH2.54 mm / 2510-2.54 mm · Pin count: 2-20 positions, single row
Quotation and selection support
- Available Pitch
- 1.25 mm / PH2.0 mm / XH2.54 mm / 2510-2.54 mm
- Pin count
- 2-20 positions, single row
- Mounting type
- Vertical (Straight 180°), right angle (R/A 90°), THT through hole
- Applicable Wire Gauge
- AWG#30-#22 (depends on pitch variant)
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Wire-to-board connector. Wire-to-board connector. Series configuration parameters: Available Pitch: 1.25 mm / PH2.0 mm / XH2.54 mm / 2510-2.54 mm; Pin count: 2-20 positions, single row; Mounting type: Vertical (Straight 180°), right angle (R/A 90°), THT through hole.
Discuss this product requirementProduct features
Pin count
2-20 positions, single row
Mounting type
Vertical (Straight 180°), right angle (R/A 90°), THT through hole
Applicable Wire Gauge
AWG#30-#22 (depends on pitch variant)
Termination style
Solder
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Durability | High |
|---|---|
| Termination style | Solder |
| Available Pitch | 1.25 mm / PH2.0 mm / XH2.54 mm / 2510-2.54 mm |
| Pin count | 2-20 positions, single row |
| Mounting type | Vertical (Straight 180°), right angle (R/A 90°), THT through hole |
| Mating Cycles | Minimum 300 cycles |
| Locking Structure | Friction positive lock |
Electrical & signal
| Rated Current per Contact | 1.0A-3.0A subject to pitch variant; derate at elevated ambient temperature |
|---|---|
| Rated voltage | 250V AC/DC |
| Initial Contact Resistance | ≤10 mΩ |
| Insulation resistance | ≥1000 MΩ |
| Withstanding Voltage | 1000V AC / 1 minute, no breakdown |
Wire & cable
| Applicable Wire Gauge | AWG#30-#22 (depends on pitch variant) |
|---|
Materials & finish
| Plating | tin plating |
|---|---|
| Contact material | Phosphor Bronze |
| Contact plating | Matte tin plated standard; Gold flash optional |
| Insulator Housing | PA66, UL94-V-0 flame rating |
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|---|
| Operating temperature | -25℃ ~ +85℃ (including current-rise temperature) |
Other specifications
| Connection type | Snap-On |
|---|---|
| Contact | Brass With gold plating Over 50U |
| Soldering Process | Wave soldering for THT headers; standard through hole soldering |
| Soldering Temperature & Time | 260 °C max, ≤5 seconds pin immersion |
Drawings & technical files
Wire-to-board connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Available Pitch: 1.25 mm / PH2.0 mm / XH2.54 mm / 2510-2.54 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
How many positions or contacts are specified?
Pin count: 2-20 positions, single row. Where a range or multiple options are shown, select the required count and pin assignment.
What mounting arrangement is used?
Mounting type: Vertical (Straight 180°), right angle (R/A 90°), THT through hole. Check installation clearance and mating geometry for this configuration.
What is specified for Applicable Wire Gauge?
Applicable Wire Gauge: AWG#30-#22 (depends on pitch variant).
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.