Pitch
3.70 mm
Wire-to-board connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Wire connectors
Wire-to-board connector · 3.70 mm
Series specification range: Pitch: 3.70 mm · Termination style: Solder
Quotation and selection support
- Pitch
- 3.70 mm
- Termination style
- Solder
- Rated current
- 5A max per circuit
- Connection type
- Snap-On
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Wire-to-board connector. Wire-to-board connector. Series configuration parameters: Pitch: 3.70 mm; Termination style: Solder; Rated current: 5A max per circuit.
Discuss this product requirementProduct features
Termination style
Solder
Rated current
5A max per circuit
Connection type
Snap-On
Temperature range
-40 To 85 °C
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Durability | High |
|---|---|
| Termination style | Solder |
| Mating Cycles | ≥30 cycles |
| Locking | Positive latch, anti-unmating |
| Pitch | 3.70 mm |
Electrical & signal
| Rated current | 5A max per circuit |
|---|---|
| Withstand voltage | 1500V AC/minute |
| Insulation resistance | ≥1000MΩ |
| Contact resistance | ≤20mΩ |
Materials & finish
| Plating | tin plating |
|---|
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|
Other specifications
| Connection type | Snap-On |
|---|---|
| Contact | Brass With gold plating Over 50U |
Drawings & technical files
Wire-to-board connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 3.70 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
What termination arrangement is used?
Termination style: Solder. Check installation clearance and mating geometry for this configuration.
What current values and conditions apply?
Rated current: 5A max per circuit. Keep each value with its stated standard, class and test condition.
What is specified for Connection type?
Connection type: Snap-On.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.