Pitch
2.0 mm
Wire-to-board connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Wire connectors
Wire-to-board connector · 2.0 mm · Initial Contact Resistance ≤ 15 mΩ
Series specification range: Pitch: 2.0 mm · Mounting type: Horizontal / right angle SMT Surface Mount
Quotation and selection support
- Pitch
- 2.0 mm
- Mounting type
- Horizontal / right angle SMT Surface Mount
- Termination style
- Solder
- Rated current
- 3 A per pin
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Wire-to-board connector. Wire-to-board connector. Series configuration parameters: Pitch: 2.0 mm; Mounting type: Horizontal / right angle SMT Surface Mount; Termination style: Solder.
Discuss this product requirementProduct features
Mounting type
Horizontal / right angle SMT Surface Mount
Termination style
Solder
Rated current
3 A per pin
Connection type
Snap-On
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Durability | High |
|---|---|
| Termination style | Solder |
| Pitch | 2.0 mm |
| Mounting type | Horizontal / right angle SMT Surface Mount |
| Mating Cycles | 300 cycles minimum |
Electrical & signal
| Rated current | 3 A per pin |
|---|---|
| Rated voltage | 250 V AC/DC |
| Initial Contact Resistance | ≤ 15 mΩ |
| Contact Resistance After Environmental Test | ≤ 25 mΩ |
| Insulation resistance | ≥ 1000 MΩ |
| Withstanding Voltage | 800 V AC, 1 min, no breakdown |
| Environmental Resistance | Resists common indoor lighting module thermal‑cycle stress; NOT for direct outdoor waterproof exposure without extra enclosure |
Materials & finish
| Plating | tin plating |
|---|---|
| Plating Option | tin plated (standard); gold plated (optional) |
| Housing material | High-temperature PA9T / PA10T, UL94-V0 |
| Contact material | Phosphor Bronze |
Environmental conditions
| Temperature range | -40 To 85 °C |
|---|---|
| Operating temperature | -25 ℃ ~ +85 ℃ |
Other specifications
| Connection type | Snap-On |
|---|---|
| Contact | Brass With gold plating Over 50U |
| Pin Count Range | 2 - 16 P |
Drawings & technical files
Wire-to-board connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 2.0 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
What mounting arrangement is used?
Mounting type: Horizontal / right angle SMT Surface Mount. Check installation clearance and mating geometry for this configuration.
What termination arrangement is used?
Termination style: Solder. Check installation clearance and mating geometry for this configuration.
What current values and conditions apply?
Rated current: 3 A per pin. Keep each value with its stated standard, class and test condition.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.