Pitch
2.0mm
Pin header connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
Pin header connector · 2.0mm · Right Angle Type (RA)
Series specification range: Pitch: 2.0mm · Mounting type: Right Angle Type (RA)
Quotation and selection support
- Pitch
- 2.0mm
- Mounting type
- Right Angle Type (RA)
- Termination
- Solder Type
- Insulator
- PA6T+30%GF, UL94V-0
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Pin header connector. Pin header connector. Series configuration parameters: Pitch: 2.0mm; Mounting type: Right Angle Type (RA); Termination: Solder Type.
Discuss this product requirementProduct features
Mounting type
Right Angle Type (RA)
Termination
Solder Type
Insulator
PA6T+30%GF, UL94V-0
Withstanding Voltage
AC 500V
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Mounting type | Right Angle Type (RA) |
|---|---|
| Number of positions | 2*14=28P |
| Termination | Solder Type |
| Pitch | 2.0mm |
Electrical & signal
| Withstanding Voltage | AC 500V |
|---|---|
| Current rating | 2AMP |
| Insulation resistance | 1000MΩ Min |
| Contact resistance | 20m Ω Max |
| Insulation resistance | 5000m Ω Min |
| Current rating | 1.0AMP |
| Withstand voltage | 500V AC/DC |
Materials & finish
| Contact plating | Au Or Sn Over 50U" Ni |
|---|---|
| Insulator | PA6T+30%GF, UL94V-0 |
| Contact material | Brass |
| Insulating material | Polyester PA6T 30%GF Black/Blue/Grey |
| Contact plating | Au, Sn over Ni |
| Material Flammability Rating | UL94-V0 |
| Contact Finish Thickness | G0 to G6 |
Environmental conditions
| Operation temperature | -40℃ To +105℃ |
|---|---|
| Operating temperature | -40°C to +105°C |
Other specifications
| No. of row | 2 |
|---|---|
| Fastening Type | Latch Lock/Eject Hooks |
| Row spacing | - |
Drawings & technical files
Pin header connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 2.0mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
What mounting arrangement is used?
Mounting type: Right Angle Type (RA). Check installation clearance and mating geometry for this configuration.
What termination arrangement is used?
Termination: Solder Type. Check installation clearance and mating geometry for this configuration.
What is specified for Insulator?
Insulator: PA6T+30%GF, UL94V-0.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.