Pitch
2.54 mm (0.100")
Pin header connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
Pin header connector · 2.54 mm (0.100") · Contact count: 06~80 Pins
Series specification range: Pitch: 2.54 mm (0.100") · Pin: 06~80 Pins
Quotation and selection support
- Pitch
- 2.54 mm (0.100")
- Pin
- 06~80 Pins
- Mounting style
- DIP Straight-through hole; optional right angle / SMT
- Housing
- PBT UL94V-0 / PA6T
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
Pin header connector. Pin header connector. Series configuration parameters: Pitch: 2.54 mm (0.100"); Pin: 06~80 Pins; Mounting style: DIP Straight-through hole; optional right angle / SMT.
Discuss this product requirementProduct features
Pin
06~80 Pins
Mounting style
DIP Straight-through hole; optional right angle / SMT
Housing
PBT UL94V-0 / PA6T
Contact plating
Gold Flash Selective
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Pin | 06~80 Pins |
|---|---|
| Gender | Male |
| Pitch | 2.54 mm (0.100") |
| Mating Cycles | ≥200 cycles |
| Insulator Height | H3.0 mm (custom height acceptable) |
| Mounting style | DIP Straight-through hole; optional right angle / SMT |
| Pin Size | Standard square pin |
Electrical & signal
| Rated current | 2 A per pin |
|---|---|
| Rated voltage | 250 V AC |
| Withstanding Voltage | 500 V AC, 1 min |
| Maximum Contact Resistance | ≤20 mΩ |
| Minimum Insulation Resistance | ≥1000 MΩ |
Materials & finish
| Housing | PBT UL94V-0 / PA6T |
|---|---|
| Contact plating | Gold Flash Selective |
| Pin material | Brass |
| Contact Base Material | Brass, good conductivity & stamping performance |
| Contact plating | gold plating on mating area; nickel underlayer; solder tail tin plated |
| Insulator Housing | UL94V-0 high-temperature resistant plastic |
Environmental conditions
| Operating temperature | -40 ℃ ~ +105 ℃ |
|---|
Other specifications
| Pin Configuration | Double row, 2×3P (6 positions) |
|---|---|
| Soldering Guide | Wave soldering/hand soldering for DIP version; Reflow soldering for SMT variant. Suggest reflow peak temp ≤260 ℃, ≤10 seconds. Avoid prolonged high‑temperature exposure. |
Drawings & technical files
Pin header connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 2.54 mm (0.100"). The PCB footprint or mating interface must use the pitch of the selected configuration.
How many positions or contacts are specified?
Pin: 06~80 Pins. Where a range or multiple options are shown, select the required count and pin assignment.
What mounting arrangement is used?
Mounting style: DIP Straight-through hole; optional right angle / SMT. Check installation clearance and mating geometry for this configuration.
What is specified for Housing?
Housing: PBT UL94V-0 / PA6T.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.