Pitch
0.5 mm
FPC / FFC connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
FPC / FFC connector · 0.5 mm · Right angle
Series specification range: Pitch: 0.5 mm · Mounting orientation: Right angle
Quotation and selection support
- Pitch
- 0.5 mm
- Mounting orientation
- Right angle
- Insulator
- Thermoplastic High Temp. UL94V-O
- Nominal voltage
- 100V AC(rms)/DC
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
FPC / FFC connector. FPC / FFC connector. Series configuration parameters: Pitch: 0.5 mm; Mounting orientation: Right angle; Insulator: Thermoplastic High Temp. UL94V-O.
Discuss this product requirementProduct features
Mounting orientation
Right angle
Insulator
Thermoplastic High Temp. UL94V-O
Nominal voltage
100V AC(rms)/DC
Contact resistance
≤20M Ohm Max(initial)
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Durability | 10000Cycles |
|---|---|
| Pitch | 0.5 mm |
| Mounting orientation | Right angle |
Electrical & signal
| Nominal voltage | 100V AC(rms)/DC |
|---|---|
| Contact resistance | ≤20M Ohm Max(initial) |
| Current rating | 1A AC(rms)/DC |
| Withstanding Voltage | 500V AC/rms |
| Insulation resistance | 500 M Ohm Min |
| Withstanding Voltage | 500V AC/rms |
| Insulation resistance | 500 MΩ min |
Materials & finish
| Insulator | Thermoplastic High Temp. UL94V-O |
|---|
Environmental conditions
| Operating temperature | -20°C~+85°C |
|---|
Other specifications
| Contact | Copper Alloy |
|---|
Drawings & technical files
FPC / FFC connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 0.5 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
What mounting arrangement is used?
Mounting orientation: Right angle. Check installation clearance and mating geometry for this configuration.
What is specified for Insulator?
Insulator: Thermoplastic High Temp. UL94V-O.
What voltage values and standards apply?
Nominal voltage: 100V AC(rms)/DC; Withstanding Voltage: 500V AC/rms; Withstanding Voltage: 500V AC/rms. Keep each value with its stated standard, class and test condition.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.