Pitch
0.5 mm
FPC / FFC connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
FPC / FFC connector · 0.5 mm · right angle SMT
Series specification range: Pitch: 0.5 mm · Mated height: 2.0 mm
Quotation and selection support
- Pitch
- 0.5 mm
- Mated height
- 2.0 mm
- Mounting style
- right angle SMT
- Material
- LCP
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
FPC / FFC connector. FPC / FFC connector. Series configuration parameters: Pitch: 0.5 mm; Mated height: 2.0 mm; Mounting style: right angle SMT.
Discuss this product requirementProduct features
Mated height
2.0 mm
Mounting style
right angle SMT
Material
LCP
Rated Current per Contact
0.5 A AC/DC
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Pitch | 0.5 mm |
|---|---|
| Mated height | 2.0 mm |
| Locking method | ZIF / Non-ZIF optional flip-lock actuator |
| Mounting style | right angle SMT |
| Mating Cycles | 20 cycles minimum |
| Height | 2.0 mm |
Electrical & signal
| Rated Current per Contact | 0.5 A AC/DC |
|---|---|
| Rated voltage | 50 V AC/DC |
| Initial Contact Resistance | ≤ 40 mΩ |
| Insulation resistance | ≥ 500 MΩ @100V DC |
| Withstand voltage | 200 V AC, 1 min, no breakdown |
Wire & cable
| Applicable FFC/FPC Thickness | 0.30 ± 0.05 mm |
|---|
Materials & finish
| Material | LCP |
|---|---|
| Terminal material | Phosphor Bronze,gold plating |
| Housing / Actuator Material | LCP, UL94-V0 high-temp thermoplastic |
| Contact material | Phosphor Bronze |
| Contact plating | Mating area gold plated; solder tail nickel-underplated |
Environmental conditions
| Operating temperature | -40 ℃ ~ +85 ℃ |
|---|
Other specifications
| Type | FFC & FPC Connector |
|---|---|
| Contact Structure | Dual-side dual-contact type |
| Vibration Test | 10-55 Hz, 3-axis, no ≥1μs electrical discontinuity |
| Shock Test | 50G half-sine, 3-axis, no signal dropout |
| Hand Soldering (Prototype Only) | ≤ 350 ℃, soldering time ≤ 3 s |
Drawings & technical files
FPC / FFC connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 0.5 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
What is specified for Mated height?
Mated height: 2.0 mm.
What mounting arrangement is used?
Mounting style: right angle SMT. Check installation clearance and mating geometry for this configuration.
What is specified for Material?
Material: LCP.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.