Pitch
0.5mm
FPC / FFC connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
FPC / FFC connector · 0.5mm · Contact count: Custom 4-40 P
Series specification range: Pitch: 0.5mm · Available Pin Count: Custom 4-40 P
Quotation and selection support
- Pitch
- 0.5mm
- Available Pin Count
- Custom 4-40 P
- Height Above Board
- 4.65 mm
- Material
- LCP
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
FPC / FFC connector. FPC / FFC connector. Series configuration parameters: Pitch: 0.5mm; Available Pin Count: Custom 4-40 P; Height Above Board: 4.65 mm.
Discuss this product requirementProduct features
Available Pin Count
Custom 4-40 P
Height Above Board
4.65 mm
Material
LCP
Plating
tin plated
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Pitch | 0.5mm |
|---|---|
| Pitch | 0.5 mm |
| Height Above Board | 4.65 mm |
| Mounting type | SMT Surface Mount |
| Locking method | Flip-Lock ZIF |
| Available Pin Count | Custom 4-40 P |
| Mating Cycles (Min.) | 30 cycles |
| Height | 0.5 mm |
Electrical & signal
| Rated Current per Contact | 0.8 A |
|---|---|
| Rated voltage | 200 V AC / DC |
| Withstanding Voltage | 500 V AC for 1 min |
| Max. Initial Contact Resistance | ≤100 mΩ |
| Insulation resistance | ≥1000 MΩ |
Materials & finish
| Material | LCP |
|---|---|
| Plating | tin plated |
| Terminal material | Brass |
| Housing material | LCP High-heat-resistant plastic, UL94V-0 |
| Contact material | Phosphor Bronze |
| Contact plating | Selective gold plating on contact area; tin plating on PCB solder tail |
Environmental conditions
| Operating temperature | -40 ℃ ~ +80 ℃ (non-condensing, no icing) |
|---|---|
| Storage temperature | -20 ℃ ~ +60 ℃ |
Other specifications
| Type | Lock |
|---|---|
| Contact Structure | Bottom contact |
| Reflow Soldering Profile | Peak temp ≤260 ℃; 20-40 s above 230 ℃; max 2 reflow passes. |
| Hand-soldering (if needed) | ≤350 ℃, ≤3 seconds per pin; avoid heating plastic housing |
Drawings & technical files
FPC / FFC connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 0.5mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
How many positions or contacts are specified?
Available Pin Count: Custom 4-40 P. Where a range or multiple options are shown, select the required count and pin assignment.
What mounting arrangement is used?
Height Above Board: 4.65 mm. Check installation clearance and mating geometry for this configuration.
What is specified for Material?
Material: LCP.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.