Pitch
0.3 mm
FPC / FFC connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
FPC / FFC connector · 0.3 mm · right angle SMT
Series specification range: Pitch: 0.3 mm · Mated height: 0.9 mm
Quotation and selection support
- Pitch
- 0.3 mm
- Mated height
- 0.9 mm
- Mounting method
- right angle SMT
- Material
- LCP
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
FPC / FFC connector. FPC / FFC connector. Series configuration parameters: Pitch: 0.3 mm; Mated height: 0.9 mm; Mounting method: right angle SMT.
Discuss this product requirementProduct features
Mated height
0.9 mm
Mounting method
right angle SMT
Material
LCP
Rated current
0.2 A per pin
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Pitch | 0.3 mm |
|---|---|
| Mounting method | right angle SMT |
| Mated height | 0.9 mm |
| Mating Cycles | Min. 30 cycles |
Electrical & signal
| Rated current | 0.2 A per pin |
|---|---|
| Rated voltage | 30 V DC |
| Maximum Contact Resistance | ≤80 mΩ |
| Insulation resistance | ≥1000 MΩ @ DC 100V |
| Withstand voltage | 150 V AC / 1 min, no breakdown |
Materials & finish
| Material | LCP |
|---|---|
| Terminal material | Phosphor Bronze,gold plating |
| Housing material | High-temperature thermoplastic, UL94-V0 |
| Contact material | Phosphor Bronze |
| Contact plating | gold plated mating area; nickel under-plating |
Environmental conditions
| Operating temperature | -40 ℃ ~ +85 ℃ |
|---|
Other specifications
| Type | FFC & FPC Connector |
|---|---|
| Pin Count Range | 9-71 Pin |
| Actuator Type | Back-flip ZIF |
| Contact Structure | Dual Upper Contact |
| Vibration Test | 10-55Hz 3-axis, no ≥1μs discontinuity |
| Hand Soldering (Prototype Only) | ≤350 ℃, soldering time ≤3 s |
Drawings & technical files
FPC / FFC connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 0.3 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
What is specified for Mated height?
Mated height: 0.9 mm.
What mounting arrangement is used?
Mounting method: right angle SMT. Check installation clearance and mating geometry for this configuration.
What is specified for Material?
Material: LCP.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.