Pitch
0.3 mm
FPC / FFC connector
Product image is temporarily unavailableProduct appearance · configuration depends on the selected modelEnlarge image
Board & FPC connectors
FPC / FFC connector · 0.3 mm · Contact count: 9P,17P,21P,25P,31P,35P,61P
Series specification range: Pitch: 0.3 mm · Available Pin Count: 9P,17P,21P,25P,31P,35P,61P
Quotation and selection support
- Pitch
- 0.3 mm
- Available Pin Count
- 9P,17P,21P,25P,31P,35P,61P
- Mated height
- 0.9 mm
- Mounting type
- Dual-sided SMT Right Angle
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Product overview
FPC / FFC connector. FPC / FFC connector. Series configuration parameters: Pitch: 0.3 mm; Available Pin Count: 9P,17P,21P,25P,31P,35P,61P; Mated height: 0.9 mm.
Discuss this product requirementProduct features
Available Pin Count
9P,17P,21P,25P,31P,35P,61P
Mated height
0.9 mm
Mounting type
Dual-sided SMT Right Angle
Material
LCP
Product images
Technical specifications
Parameters may cover a series or several configurations. Confirm ratings for the selected contact count, dimensions and termination.
Mechanical & connection
| Pitch | 0.3 mm |
|---|---|
| Mounting type | Dual-sided SMT Right Angle |
| Mated height | 0.9 mm |
| Available Pin Count | 9P,17P,21P,25P,31P,35P,61P |
| Locking method | Optional ZIF / Non-ZIF flip-lock actuator |
| Mating Cycles | Min. 800 cycles |
| Height | 0.9 mm |
Electrical & signal
| Rated Current per Contact | 0.3 A |
|---|---|
| Rated voltage | DC 50 V |
| Contact resistance | ≤ 35 mΩ |
| Insulation resistance | ≥ 1000 MΩ |
| Withstand voltage | AC 200 V, 1 minute |
| Vibration resistance | Pass IEC 60068‑2‑64 multi‑axis vibration test; no open‑circuit, contact resistance drift ≤ 10 mΩ |
Wire & cable
| Applicable FFC/FPC Thickness | 0.2 mm |
|---|
Materials & finish
| Material | LCP |
|---|---|
| Terminal material | Phosphor Bronze,gold plating |
| Housing material | LCP, UL94-V0 flame retardant |
| Contact material | Phosphor Bronze |
| Contact plating | gold plated contact area; nickel underlayer |
Environmental conditions
| Operating temperature | -40 ℃ ~ +85 ℃ |
|---|
Other specifications
| Type | FFC & FPC Connector |
|---|---|
| Manual soldering | ≤ 320 ℃, soldering time ≤ 3 s |
Drawings & technical files
FPC / FFC connector drawing request
After selecting the connection configuration, review its dimensions, pin assignment and installation requirements. Include the required configuration in your request.
Request this product drawingSelection questions
What is the connection pitch?
Pitch: 0.3 mm. The PCB footprint or mating interface must use the pitch of the selected configuration.
How many positions or contacts are specified?
Available Pin Count: 9P,17P,21P,25P,31P,35P,61P. Where a range or multiple options are shown, select the required count and pin assignment.
What is specified for Mated height?
Mated height: 0.9 mm.
What mounting arrangement is used?
Mounting type: Dual-sided SMT Right Angle. Check installation clearance and mating geometry for this configuration.
Confirm the configuration. Get a quote.
Share the model or required specification, quantity and delivery target.